News

Home

What are the precautions for the use of gasification hydrogen peroxide sterilizers?

Release time:

13 Oct,2022

Gasification hydrogen peroxide sterilizer is a special kind of sterilizer, which is small in size and can work continuously.But there are some precautions when using it.

(1) Cooling
If it is maintained for a long time, the temperature will begin to drop.Cooling is usually achieved by directly turning off the heating switch, but the sterilization cover cannot be directly opened.Please wait until the temperature is below 40 degrees.To use the quick cooling method, immediately open the air outlet and cover with a wet towel.

(2) Keep warm
The insulation process has also been disinfected.At this time, pay attention to the low temperature and be careful not to fall below the specified value. It is generally between 120-22 degrees and keep warm for half an hour.The temperature of the hydrogen peroxide sterilizer is very high when it is kept warm.Wear gloves during operation.What problems do I need to pay attention to when using a hydrogen peroxide sterilizer?In order to avoid burns, it is necessary to check the parameters and time of the needle.A heat switch that can be adjusted during the insulation process.By adjusting the exhaust gas, a certain temperature can be maintained.When adjusting, it is firm and fine-tuned.

(3) Heating
Before heating, a certain amount of water must be checked in the gasification hydrogen peroxide sterilizer.Check whether the sterilizer is wrapped in kraft paper and whether the bottle mouth is placed on it. This is very important for whether the disinfection cap is closed, especially whether the washing machine is clean in the ditch.If the mats are not neat, steam leakage will occur and there will be no disinfection effect.That's not safe.When the temperature rises to 90 degrees, close the air vents for heating.